JK810 Integrated Hydraulic DTH Drilling Rig
JK810 is an Integrated hydraulic DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation.Atlas Copco air end built into the dril rig ensure the supplier of air.The FOPS-approved cabin and automatic rod exchange system come standard. Heavy-duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety. The hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining.
PRODUCT DESCRIPTION
JK810 is an Integrated hydraulic DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation.Atlas Copco air end built into the dril rig ensure the supplier of air.The FOPS-approved cabin and automatic rod exchange system come standard. Heavy-duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety. The hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining.
| General | Weight | kg | 18000 |
| Length | mm | 9920 (transport) | |
| Width | mm | 2700 | |
| Height | mm | 3300 | |
| Undercarriage | Track width | mm | 350 |
| Ground clearance | mm | ≥400 | |
| Track oscillation | ° | ±10° | |
| Walking speed | km/h | 2.2 (low) / 3.5 (high) | |
| Grade ability | ° | 20° | |
| Engine | Model | QSL8.9-C360-30 | |
| Type | Water-cooled six-cylinder EFI diesel engine | ||
| Rated power | kw/rpm | 264/2100 | |
| Fuel tank capacity | L | 600 | |
| Air compressor | Model | Atlas Copco two-stage rotary screw air compressor | |
| Working pressure | bar | 20 | |
| Max. FAD | m3/min | 19.8 | |
| Rotary motor | Rotation rate | rpm | 0-160 |
| Max.rotation torque | Nm | 3300 | |
| Feeding method | Hydraulic motor + Chain | ||
| Feeding force | kN | 12 | |
| Lifting force | kN | 18 | |
| Feed | Feeding stroke | mm | 4750 |
| Feed extension | mm | 1100 | |
| Drill pipe changer | Drilling diameter | mm | Φ90 - Φ165 |
| Drilling depth | m | 28 | |
| Pipe diameter | mm | Φ76/Φ89 | |
| Pipe length | m | 4 | |
| Pipe capacity | piece | 6+1 | |
| Hammer specs | 4" - 5" | ||
| Dust collector | Collecting method | Hydraulic dust collecting | |
- JK830 Integrated DTH Automatic Drilling Rig
- JK810 Integrated Hydraulic DTH Drilling Rig
- JK650 Integrated DTH Drilling Rig
- JKS500S Crawler Mounted Telescoping Mast Well Drillnig Rig
Copyright © Zhangjiakou Xuanhua Jinke Drilling Machinery Co., Ltd. All Rights Reserved | Sitemap
